激光切割鋁板還要看激光發生器的功率，6000W的厚能切到16mm，4500W切到12mm也行的，但只是加工費用高，因為，這是高反射材料，激光切割是利用經聚焦的高功率密度激光束照射工件，使被照射的材料迅速熔化、汽化、燒蝕或達到燃點，同時借助與光束同軸的高速氣流吹除熔融物質，從而實現將工件割開。
Laser cutting of aluminum plate also depends on the power of the laser generator. It is OK to cut the thickness of 6000W to 16mm and 4500W to 12mm, but the processing cost is high, because it is a highly reflective material. Laser cutting irradiates the workpiece with a focused high-power density laser beam to quickly melt, vaporize, ablate or reach the ignition point, At the same time, with the help of high-speed airflow coaxial with the beam, the molten material is blown away, so as to cut the workpiece.
激光切割鋁板的切面像切其他材質一樣光滑嗎？
Is the cut surface of laser cutting aluminum plate as smooth as that of other materials?

鋁板切口一樣也是光滑的，鋁板只是高反光材料，需要大的激光發生器，切割氣體同其他材料一樣，都是用氮氣切割，不會造成表面不光滑的。
The cut of aluminum plate is also smooth. Aluminum plate is only a high reflective material and needs a large laser generator. Like other materials, cutting gas is cut with nitrogen, which will not cause unsmooth surface.
鋁板采用激光切割特點：
Aluminum plate adopts laser cutting, with the following features:
1、切割縫細：激光切割鋁板的割縫一般在0.1mm-0.2mm
1. Fine cutting seam: the cutting seam of laser cutting aluminum plate is generally 0.1mm-0.2mm
2、切割面光滑：激光切割鋁板的切割面無毛刺無掛渣。
2. Smooth cutting surface: the cutting surface of laser cutting aluminum plate shall be free of burrs and slag.
3、熱變形?。杭す饧庸さ募す飧羁p細、速度快、能量集中，因此傳到被切割材料上的熱量小，引起材料的變形也非常小。
3. Small thermal deformation: the laser cutting of laser processing is fine, fast and energy concentrated. Therefore, the heat transmitted to the cut material is small, and the deformation of the material is also very small.
4、節省材料：激光加工采用電腦編程，激光設備可以把不同形狀的鋁板加工件進行材料的套裁，提高鋁板的材料利用率，節省大量的材料成本。
4. Material saving: computer programming is adopted for laser processing. Laser equipment can carry out material nesting of aluminum plate processing parts with different shapes, improve the material utilization rate of aluminum plate and save a lot of material costs.
5、能切多厚鋁板主要看激光發生器的功率，一般6000W的厚能切到16mm，4500W能切到12mm。
5. How thick aluminum plate can be cut mainly depends on the power of the laser generator. Generally, the thickness of 6000W can be cut to 16mm and 4500W can be cut to 12mm.